Screw Blower Oil Viscosity
(For Highspeed Methanol 206D & 210C)
PSI Superchargers recommends you use a 0W-20 full synthetic oil for proper gear and front bearing lubrication. Fill gearcase with the blower on a flat level surface until oil starts to run out the lowest ( 6 o'clock ) snout mounting hole, DO NOT use the sight-glass. The sight glass is there for oil condition / inspection ONLY.
(For Highspeed Methanol 206D & 210C)
PSI Superchargers recommends you use a 0W-20 full synthetic oil for proper gear and front bearing lubrication. Fill gearcase with the blower on a flat level surface until oil starts to run out the lowest ( 6 o'clock ) snout mounting hole, DO NOT use the sight-glass. The sight glass is there for oil condition / inspection ONLY.
